If water is escaping between the door and base track consider attaching a separate drip tray to catch and redirect what.
How to install glass shower doors.
Remove the jamb and the magnetic rail from the panel and attach the jamb.
Run a bead of silicone on the underside of the threshold.
Close the door and mark the wall along the jamb.
To install a glass side panel slip the remaining jamb onto one of the panel s edges and the magnetic strike rail onto the other.
Installing a glass shower door step 1.
Place the left side column onto wall and secure it by placing screws into the correct wall anchors.
Fit the panel into the base track.
Butt the jamb against the wall.
For the side columns use wall anchors and hammer them into the holes.
Drill proper holes into the walls for the side rails.
Towel off the wet frame before adding more sealant and allow the sealant to cure completely prior to your next test.
Hold the bar up to the shower wall lined up to the support holes on the top of panel a.
Mark the holes located in the glass panel onto the bar with a permanent marker.
Drop rubber spacers in the channel on the left side of the threshold to hold the stationary panel of the door.
Repeat this with the right column.
Install the support hardware on the bar matching the holes.