Step 1 position the pull.
How to install a sliding closet door pull.
Then latch the wheels on top of the door onto the back runner of the top track.
Hold the door so the top is tilted backward.
Either way let us know how it s going.
This assumes you have a solid core pocket door.
Mark the measurement with the edge of another piece of masking tape so that.
Step 2 trace the template.
Insert the wheels on the top of the first door into the top track.
Use a razor blade to cut any paint finish between door and pull.
If you have a hollow core door then you will need to locate the wood block in the door and install the pull in that block.
Mark the location for the door pull.
If that doesn t work at least now you may have enough to grab with the pliers without the screw.
The normal height for hardware on an 8 foot door is 36 inches from the bottom side up.
The task is easier if you predrill the holes and use a drill bit on the drill to secure the screws.
Carefully use a small standard screwdriver to go around and slowly pry the pull off.
To install the doors install the track on the top of the door s frame.
Drill a shallow hole in the center drive a screw into the hole far enough to get a grip on the pull two complete turns at least grab the screw with a pair of pliers and pull it out.