A how to video in fixing the slamming door by adjusting the hinge tension.
How to fix soft close door hinges.
Take a moment to focus on the soft close hinge and find the adjustment tab.
When the door is in the open position it will expose two screws on each.
To confirm that it s the adjustment tab try pulling on it with the tip of your finger.
Open the door and hold it open with one hand.
Close the hinged door all of the way.
If you need to push the door away turn the screw counterclockwise to bring the door in better alignment with the vertical edge of the cabinet.
Start with the top hinge unscrewing it from the door and then from the doorframe.
This screw will move your door in or out.
Various screws on the hinge can be loosened or tightened in order to change the position of the door.
The process is very simple but not al.
Internal spring hinges open the cabinet door and push it shut it again.
Therefore if your cabinet door is sagging not closing properly or has a large gap near the hinge the fix is as easy as grabbing a screwdriver and adjusting the correct screw s.
This video is filmed on a garage entry door.
Start wood screw through the adapter before placing.
Using your screwdriver turn the front screw clockwise to bring the hinge bearing edge of the door closer to the cabinet side.
Move the door up or down to level and then tighten the screws.
Install one at the top and one at the bottom.
This will pull the door back towards the hinge side of the cabinet.
Open the door and let go of it.
Stop slamming doors permanently with the anti slam door device shhhtop.
Shut the door so that the inner cabinet or cupboard is completely concealed.
Attaches to 3 5 inch and 4 inch hinges.
If the cabinet door fails to close completely or fails to stay closed.
Loosen all the hinges on that door.
Maybe one of your doors is slightly lower than the other one.
You only need 1 set of 2 per door to provide the protection you need.
Place soft close hinge damper adapter butted up in the top corner of the cabinet against the side wall and top of cabinet.